Our Plant of easy open end

Easy open end production line

Our 5 lines-10 channels easy open ends, normal ends production line.

Annual output is around 2 billion units.

Quality control of Easy open ends

Tinplate Production Line

Pickling:

Pickling is the process of chemically removing impurities, rust and oxide layer that develops on the surface of

the plate sheet, also improves the surface quality of the plate to prepare for further processing-cold rolling.

Cold Rolling

To reduce the thickness of the metal by a predetermined amount until the desired thickness is achieved. The process

begins with pickled and oiled coils that pass through the five stands. The metal is then reduced in one pass until the

final thickness is achieved.

Annealing

Tinplate annealing is a process used in the manufacturing of tinplate, which is a thin sheet of steel

that is coated with a layer of tin to prevent rusting. The annealing process involves heating the tinplate

to a high temperature and then cooling it down slowly to make it more ductile and malleable. This process

helps to remove any stresses in the steel and to improve its mechanical properties.
The annealing process is typically carried out in a furnace, which is heated using gas or electricity.

The tinplate is then introduced into the furnace and heated to a temperature of around 800-900°C. Once

it has reached the desired temperature, it is held at that temperature for a specific period of time, typically

several hours, to allow the steel to fully anneal.
After the annealing process is completed, the tinplate is then slowly cooled down in the furnace to prevent

it from becoming too brittle. This cooling process may take several hours as well, depending on the thickness

of the tinplate and the specific requirements of the manufacturer.

Tinning

The electrolytic tinplate unit fills in the market blank of Northern part of China. Electrolytic tinplate integrates the

advantages of steel and tin. It brings excellent properties of formability and strength, paintability and printability,

solderability and weldability, corrosion resistance and beautiful appearance. Tinplate also has nontoxic and good

ductility properties. It is widely used in food packaging, medicine packaging, commodity packaging, instrument and

meter packaging, and industrial product packaging

TFS Production Line

Overview

Uncoiling

Degreasing

The main function of electrolytic degreasing unit is to clean the surface of the steel plate, eliminating

the residual oil, residual iron and other pollutants to control the residual oil and residual iron in a limited

range. Meanwhile, it can restrain the bond of steel plate or other defects during Batch Annealing process

to meet the demand of medium to high standard of the surface cleanness of the steel plate.

Chroming

Chroming is achieved through a process known as electrodeposition, where an electric current is used

to deposit the chromium layer onto the steel substrate. The resulting is thin, typically only a microns,

and provides excellent resistance to corrosion, making it ideal for use in packaging applications.

Aluminum Production Line

Overview

Five Tanderm Hot Rolling

The Five Tandem Hot Rolling process is an important method used in the production of high-quality

aluminum products, and has helped to revolutionize the aluminum industry by making it possible to

produce lightweight, durable materials with superior mechanical properties.

Online Degassing

Online degassing of aluminum is a process used to remove hydrogen (H) and slag from molten aluminum. It is typically

accomplished in one of three areas of the metalcasting facility: in the transfer ladle, in crucible furnaces, or in an in-line system.

The process involves using either dry nitrogen or argon gas to spin the aluminum and remove the impurities.

Thermtronix® produces two aluminum rotary degassing systems, Autoclean II and Autoclean Electric Shuttle,

which are both foundry-proven methods of spin degassing. AdTech Degassing Unit also produces an online degassing unit

which is used to remove hydrogen (H) and slag from molten aluminum. The unit has dual functions: processing and heating

and serves the high precision molten aluminum purification industry SNIF Method.

SNK Scalper

SNK scalper is an important tool used in the aluminum industry to produce high-quality, defect-free aluminum sheets

and plates. Its precision and efficiency make it an essential part of the production process, and it has helped to revolutionize

the way in which aluminum products are manufactured.